Author Topic: Sat nav audio over BY  (Read 816 times)

0 Members and 1 Guest are viewing this topic.


  • Newbie
  • *
  • Posts: 12
    Sat nav audio over BY
    « on: 2016-03-01 20:46:24 »
    Had the Bluetooth on the bike coded and working again.  I've got the bmw nav (zumo 660) and a scala 9x. Couple of questions.
    I'm connecting the scala to the bike and not to the sat nav. Getting radio and media player and sat nav instructions all great but how do i control volume between the radio and the sat nav?  The nav is very quiet and can't control it on the sat nav menu because it won't let me.
    I have volume control on the scala but that's both radio and sat nav of course. I need to control one or the other independently

    Sent from my SM-N910F using Tapatalk


    • Full Member
    • ***
    • Posts: 137
    • Country: ch
    • K1600 Exclusive
      Re: Sat nav audio over BY
      « Reply #1 on: 2016-03-01 20:57:16 »
      Good question. I have the same setup, but never tried to change the volume separately. Did you try to change the volume on the nav device directly?
      It doesn't have to make sense. It's ok if it's just fun :-)

      Offlinekeith zx

      • Full Member
      • ***
      • Posts: 227
      • Country: gb
        Re: Sat nav audio over BY
        « Reply #2 on: 2016-03-01 21:20:54 »
        i had the same issue ,remove your sat nav from the mount ,go to the settings on the nav,go to the volume and turn it right up to 100,then refit it to the bike mount ,you can then turn it up and  down from your headpiece ...